Crydom One DR Series User Manual download pdf

AC/DC Output Single Channel &

AC Output Dual Channel SSR

INSTALLATION INSTRUCTIONS

Install the relay on the DIN rail (as shown in drawing).

Wire the relay to the input side. AWG #22 minimum,

AWG #16 maximum (0.3-1.3 mm

). Temperature rating of 111ºC.

Wire the relay to the output side. AWG #22 minimum

(0.3 mm

), AWG #14 (2.1 mm

) x 2 or AWG #12

(3.3 mm

) x 1 (standed/solid) maximum. Temperature

rating of 111ºC.

Maximum recommended terminal screw torque input

4.4 in-lbs (0.5 Nm) & output 7 in-lbs (0.8 Nm).

If multiple units are installed be sure to follow derating

curves (reverse side of this sheet).

Please read all installation instructions before using SeriesOne DR SSRs.

Rev: 041515

SOLID STATE RELAY

To install

on DIN rail

To remove

from DIN rail

General Notes

(A) Not all combinations of ratings are available.

(B) No grounding wire required. DC inductive loads must be diode suppressed.

(D) 4 Terminal screws Pozidrive #1, 3/16 in (4.8 mm).

(E) Minimum wire insulation strip length 0.20 in (5.1 mm), maximum 0.28 in (7.1 mm).

Installation Sheet

DIN Rail Mount

Do not forget to visit us at: www.crydom.com

PART NUMBER NOMENCLATURE

Single Channel

Dual Channel

Required for valid part number

For options only and not required for valid part number

(A)

Series

Operating Voltage

24: 24-280 VAC

48: 48-600 VAC

Rated Load Current

06: 6 Amps

Control Voltage

D: 4-32 VDC

0624 DDRD

Agency Approvals

X: ATEX II 3G Ex nA IIC T4 Gc

approved

Switching Type

Blank: Zero Voltage Turn-On

R: Instantaneous Turn-On

Output

Only

Series

Operating Voltage

06: 1-60 VDC

10: 1-100 VDC

24: 24-280 VAC

48: 48-600 VAC

Rated Load Current

03: 3 Amps

06: 6 Amps

12: 12 Amps

Control Voltage

D: 4-32 VDC

A: 200-265 VAC

B: 90-140 VAC

E: 18-36 VAC

1206 DDR

Agency Approvals

X: ATEX II 3G Ex nA IIC T4 Gc

approved

Switching Type

Blank: Zero Voltage Turn-On

(AC Output Only)

R: Instantaneous Turn-On

(AC Output, D suffix Only)

(F)

1 2

Installation Sheet 1

Summary of Contents

Page 1 - Installation Sheet

AC/DC Output Single Channel & AC Output Dual Channel SSRINSTALLATION INSTRUCTIONSInstall the relay on the DIN rail (as shown in drawing).Wire the

Page 2

For DRxxx03, DRxxx06 or DRxxx12 versionsFor DRDxxD06 versionsWIRING DIAGRAMS(B)WARNINGRISK OF MATERIAL DAMAGE AND HOT ENCLOSURE• The product's si

Comments to this Manuals

No comments

Crydom One DR Series User Manual

Browse online or download User Manual for Hardware Crydom One DR Series. Crydom One DR Series User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Crydom One DR Series